Product Description The conductor rail system is a modem power supply system using single-pole insulated conductor rails.lt complies with the latest regulations and provide the electric energy for mobile consumers. The conductor rail material is copper (200A-5000A),aluminium(150A-3000A).The aluminium conductor rail is provided with a proven and patented stainless steel contact surface. Any numbers of poles can be installed vertically or horizontally. on straight or curved systems. The conductor rail system can be installed indoor or outdoor. For high temperature conditions, a high temperature insulation cover up to +115°C is available, also for low temperature conditions,it could be up to -40°C. The entire conductor rail system is insulated to current Safety Regulations,it is entirely protected against direct contact. Ground insulation cover is marked yellow-green on one side over the entire length of the rail. Insulation Geneally. the phase line is Color green, the ground line is yellow-green plastic housing For H19 system ,the standard length is 4.5 m long,and for other systems,the standard length is 6.0 m long. Other sections are available. Jointing material Snap-in joint splices provide mechanical end electrical continuity. They include insulated protection covers. Feed Sets Line feeds (any joints) or end feeds. End caps The open ends of the conductor are closed by end caps. Hangers Standard brackets for conductor attachment to crane girders are available. Conductor with sliding and fix point hangers. Standard distance between suspension points for indoor and outdoor installations; 1500 mm to 2000 mm.
Product Description The conductor rail system is a modem power supply system using single-pole insulated conductor rails.lt complies with the latest regulations and provide the electric energy for mobile consumers. The conductor rail material is copper (200A-5000A),aluminium(150A-3000A).The aluminium conductor rail is provided with a proven and patented stainless steel contact surface. Any numbers of poles can be installed vertically or horizontally. on straight or curved systems. The conductor rail system can be installed indoor or outdoor. For high temperature conditions, a high temperature insulation cover up to +115°C is available, also for low temperature conditions,it could be up to -40°C. The entire conductor rail system is insulated to current Safety Regulations,it is entirely protected against direct contact. Ground insulation cover is marked yellow-green on one side over the entire length of the rail. Insulation Geneally. the phase line is Color green, the ground line is yellow-green plastic housing For H19 system ,the standard length is 4.5 m long,and for other systems,the standard length is 6.0 m long. Other sections are available. Jointing material Snap-in joint splices provide mechanical end electrical continuity. They include insulated protection covers. Feed Sets Line feeds (any joints) or end feeds. End caps The open ends of the conductor are closed by end caps. Hangers Standard brackets for conductor attachment to crane girders are available. Conductor with sliding and fix point hangers. Standard distance between suspension points for indoor and outdoor installations; 1500 mm to 2000 mm.
Conductor rail system
Conductor rail
Aluminium
Copper
Stainless Steel
Type
H19
H24
H32
H35
H52
H19
H24
H32
H52
H19
Nominal current at 100% DC and 35DC [A]
150
250-300
320-1250
230-800
1250-3000
150-500
500-800
800-1600
1250-5000
25
D.C. resistance at 35°C [Ω/km]
0.376
0.203-0.187
0.153-0.046
0.153-0.067
0043-0.015
0.376-0.156
0.116-0.067
0.067-0.039
0.036-0.007
11.652
Impendance at 35°C [Ω/km]
0.381
0.209-0.195
0.155-0.048
0.155-0.069
0.044-0.017
0.377-0.158
0.118-0.069
0.069-0.040
0.038-0.008
11.663
Support spacing [m]
1.5
1.5
1.8
1.8
2
1.5
1.5
1.8
2
1.5
Rail length [m]
4.5
6
6
6
6
4.5
6
6
6
4.5
Housing length [m]
4.42
5.88
5.83
5.83
5.75
4.42
5.88
5.83
5.75
4.42
Max.voltage [V]
660V
Dielectric strength [KV/mm]
30-40
Travelling speed
^ 600 m/min
standard
GB7251.2-2006
Expansion joint
not required uo to 200 m installation length
Flame retardant
Class B1-no flaming particles,self-extinguishing
Permissible ambient temperature
Standard insulation -30 C- +70°C High temperature insulation -20ec- +115°C Low temperature insulation -40C- +85°C
Conductor rail system
Conductor rail
Aluminium
Copper
Stainless Steel
Type
H19
H24
H32
H35
H52
H19
H24
H32
H52
H19
Nominal current at 100% DC and 35DC [A]
150
250-300
320-1250
230-800
1250-3000
150-500
500-800
800-1600
1250-5000
25
D.C. resistance at 35°C [Ω/km]
0.376
0.203-0.187
0.153-0.046
0.153-0.067
0043-0.015
0.376-0.156
0.116-0.067
0.067-0.039
0.036-0.007
11.652
Impendance at 35°C [Ω/km]
0.381
0.209-0.195
0.155-0.048
0.155-0.069
0.044-0.017
0.377-0.158
0.118-0.069
0.069-0.040
0.038-0.008
11.663
Support spacing [m]
1.5
1.5
1.8
1.8
2
1.5
1.5
1.8
2
1.5
Rail length [m]
4.5
6
6
6
6
4.5
6
6
6
4.5
Housing length [m]
4.42
5.88
5.83
5.83
5.75
4.42
5.88
5.83
5.75
4.42
Max.voltage [V]
660V
Dielectric strength [KV/mm]
30-40
Travelling speed
^ 600 m/min
standard
GB7251.2-2006
Expansion joint
not required uo to 200 m installation length
Flame retardant
Class B1-no flaming particles,self-extinguishing
Permissible ambient temperature
Standard insulation -30 C- +70°C High temperature insulation -20ec- +115°C Low temperature insulation -40C- +85°C